To Next Page

To Previous Page

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference 119

53-1002965-01

IPv6 PIM debug commands

Brocade# debug ipv6 pim group ff0::8

PIM6: group ff0::8 debugging is on

Brocade# PIM.VRF0: Deallocated hw resources for (7400::200 ff0::8), parent:

NIL,Nil. olist not empty

VRF0 Flow Entry Delete (2001:DB8::200 ff0::1) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::2) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::3) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::4) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::5) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::6) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::7) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::8) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::9) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::a) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::b) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::c) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::d) HW bits: 1 1

VRF0 Flow Entry Delete (2001:DB8::200 ff0::e) HW bits: 1 1

debug ipv6 pim join-prune

Syntax: [no] debug ipv6 pim join-prune

This command controls join prune processing and displays debugging information related to the

IPv6 join prune messages. The following is the truncated sample output from the debug ipv6 pim

join-prune command.

Brocade# debug ipv6 pim join-prune

PIM6: join-prune debugging is on

Brocade# PIMSM.0: BEGIN J/P proc: rpf_nbr fe80::768e:f8ff:fe34:3c80, to_me=1 from

fe80::768e:f8ff:fe3e:9600, intf v1844 ----

Group=ff0::1. Join list: 1 srcs

J-Src=2001:DB8::200, wc=0, rpt=0, SM=1

PIM.VRF0: Processing (S,G) Join (2001:DB8::200 ff84::1) from