Brocade Communications Systems FastIron X Series Diagnostic Manual

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference 169
53-1002965-01
MLD snooping debug commands
6
This command displays debugging information related to the MLD snoop packets. Command
output resembles the following example.
Brocade# debug mld-snoop packet 3 230001
debug mldsnoop packet (0x3 0x230001)
// dm raw: RX [a0a]2322::3 ->ff1e::23:1
port: 1/1/1
rtr_l2mcast_fwd_data (pkts:2), (0x3 0x230001), from e1/1/1 vlan 130, has fwd_entry
rtr_l2mcast_fwd_data (pkts:1), (0x3 0x230001), from e1/1/1 vlan 130, clear
hw_aging flag
debug mld-snoop show
Syntax: [no] debug mld-snoop show
This command displays all the MLD snooping debug settings. Command output resembles the
following example.
Brocade# debug mld-snoop show
debug mldsnoop vlan 100 is enabled
debug mld-snoop timer
Syntax: [no] debug mld-snoop timer
This command displays the MLD snooping related timer events. Command output resembles the
following example.
Brocade# debug mld-snoop timer
Brocade# mld timer, VL130(e1/1/2) change V3 client age out

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English