188 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
show tech-support
9
0d00h00m11s:I:System: Stack unit 1 POE Power supply 1 with 410000 mwatts
capacity is up
Dynamic Log Buffer (50 lines):
0d00h31m23s:W:System:Stack unit 1 Fan speed changed automatically to 2
0d00h28m33s:W:System:Stack unit 1 Fan speed changed automatically to 1
0d00h22m33s:W:System:Stack unit 1 Fan speed changed automatically to 2
.
.
(output truncated)
show tech-support acl
Syntax: show tech-support acl
This command displays debugging information related to ACL configuration and counters.
Command output resembles the following example.
Brocade# show tech-support acl
ACL Config Information.
ipv6 access-list bvs: 52 entries
Standard IP access list 1 (hw usage : 2)
permit any (hw usage : 1)
Standard IP access list 2 (hw usage : 2)
permit any (hw usage : 1)
Standard IP access list 3 (hw usage : 2)
permit any (hw usage : 1)
Standard IP access list 4 (hw usage : 2)
permit any (hw usage : 1)
Standard IP access list 5 (hw usage : 2)
permit any (hw usage : 1)
Extended IP access list 101 (hw usage : 3)
permit tcp any any (hw usage : 1)
permit ip host 192.168.2.2 any (hw usage : 1)
ACL-ON-ARP list information:
Port ACL ID Filter Count
ve2 103 0
ve3 101 0
ve4 101 0
ACL Accounting Information :
Traffic Policy - g_voip:
General Counters:
Port Region#Byte Count Packet Count
------------------ -------------------- ----------------------
7 (4/1 - 4/12) 85367040 776064
All port regions 84367040 776064
Rate Limiting Counters:
Port Region# Green Conformance Yellow Conformance Red Conformance
--------------------------------- ------------------ ----------------
7 (4/1 - 4/12) 329114195612139520 37533986897781760 0
All port regions 329114195612139520 37533986897781760 0