Brocade Communications Systems FastIron X Series Diagnostic Manual

202 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
show tech-support stack
9
show tech-support stack
Collects and displays debugging information related to stacking configurations.
Syntax show tech-support stack
Parameters None
Modes Privileged EXEC mode
Command
Output
The show tech-support stack command output displays the following information related to
stacking configurations:
• Stacking status
• Stack resource details
• Stack IPC statistics
• Port statistics for all stack ports
• Stack IPC
• Stack mail traffic statistics
• Stack mailbox neighbors
The command output includes the output of the following commands:
• show stacking
• show stack resource
• show stack rel-ipc
• show statistics stack-ports
• show stack ipc
• dm stk show debug mail traffic
• dm stk show debug mail neighbors
NOTE
For information about the show commands, refer to the FastIron Ethernet Switch Stacking
Configuration Guide.
Examples The following example displays truncated output from the show tech-support stack command.
Brocade# show tech-support stack
Stacking Status.
alone: standalone, D: dynamic config, S: static config
ID Type Role Mac Address Pri State Comment
1 S ICX6610-24P active 0000.0001.0100 128 local Ready
5 S ICX6610-24F standby 0000.0002.0100 0 remote Ready
6 S ICX6450-24 member 0000.00b0.4fa0 0 remote Ready
standby active
+---+ +---+
2/6| 5 |2/1==2/1| 1 |2/6
+---+ +---+
active
--- +---+

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English