Brodie BERT-E - Enter Button

 Press Reset to reset the total, or values displayed in the bottom display (grand total, max, or min).
Press Enter after Reset to confirm the reset.
Up / Display Button
 Press Display when in Run mode to display the grand total, again to display the maximum, and
again to display the minimum reading since last reset. These displays will time out in 12 seconds,
or press Display until total is displayed in the lower display. Press Enter to lock this display, and
disable the 12 second time out.
 Press the Up arrow button to scroll forward through the menus, decimal point, or to increment the
value of a digit.
Enter Button
 Press the Enter button to access a menu or to accept a setting.
 Press Enter to lock the grand total, maximum, or minimum value on the lower display, and disable
the 12 second time out.
 Press Enter while the grand total, max, or min reading is locked on the lower display to return to
run mode.
 Press Enter to acknowledge alarm (if enabled).
 Press Enter to lock display of grand total, Max or Min readings (disables 10 second timeout).
18