Resetting Max/Min Readings (RESET MAXIMUM, MINIMUM)
The maximum and minimum readings may be reset by pressing the Reset button while displaying either
the maximum or minimum. The display will show RESET to verify the reset of maximum or minimum
value.
The maximum and minimum must be reset individually.
Reset Meter to Factory Defaults
Reset to factory defaults will restore most meter parameters to their factory default setting.
When the parameters have been changed in a way that is difficult to determine what’s happening, it might
be better to start the setup process from the factory defaults.
Factory default reset does not change the saved backup restore settings, override passwords, or edit
parameters locked by a permanent non-resettable grand total. See Non-Resettable Grand Total, as
described on page 62.
Instructions to load factory defaults can be found in the Backup & Restore (BACKUP) menu on page 70.
To Next Page
Loading...