Brodie BERT-E - Product Ratings and Approvals

Product Ratings and Approvals
FM Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III, Division 1; T6
Class I, Zone 1, AEx d IIC T6 Gb
Zone 21, AEx tb IIIC T85°C
Ta = -40°C to +75°C
Enclosure: Type 4X & IP66
Certificate number: 3048474
CSA
Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III, Division 1;
Ex d IIC T6
Enclosure Type 4X, IP66/68:
Ta = -40°C to +75°C
Certificate number: 2587004
ATEX
II 2 G
Ex d IIC T6 Gb
Tamb -40°C to +75°C
ATEX Certificate: Sira 13ATEX1010X
IECEx
Ex d IIC T6 Gb
Ta = -40°C to +75°C
IECEx Certificate: IECEx SIR 13.0012X
Special Conditions for Safe Use:
Use suitably certified and dimensioned cable entry device and/or plug. The equipment shall be installed
such that the supply cable is protected from mechanical damage. The cable shall not be subjected to
tension or torque. If the cable is to be terminated within an explosive atmosphere, then appropriate
protection of the free end of the cable shall be provided.
Year of Construction
This information is contained within the serial number with the first four digits representing the year and
month in the YYMM format.
For European Community: The BERT-E must be installed in accordance with the ATEX directive
94/9/EC, and the product certificate Sira 13ATEX1010X
6