Grand Total Units (GtotU)
This menu is used to select the display units for the grand total. The base unit and a multiplier prefix are
selected. If grand total and units are selected to display, the multiplier prefix will appear before the total
unit (example: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or 1 million units. The meter will calculate the total
appropriately for display with the programmed multiplier and units.
A custom unit may be selected (CUST), and no multiplier menu will be required. In this case, use the
grand total conversion factor as defined in
Custom Units Grand Total Conversion Factor (GrtCF) on page 35.
Press the Enter button, at any time, to accept a setting or Menu button to exit without saving changes.
To Next Page
Loading...