Why are the printed pages from my Brother DCP 8060 All in One Printer smeared?
If the printed pages from your Brother All in One Printer are smeared, the Paper Type setting may be incorrect for the type of print media you are using, or the print media may be too thick or have a rough surface.
What to do if my Brother All in One Printer does not feed paper from the MP tray?
If your Brother All in One Printer does not feed paper from the MP tray, fan the paper well and put it back in the tray firmly. Also, make sure that MP tray mode is chosen in the printer driver.
How to fix printouts that are too light on my Brother DCP 8060?
If the printouts from your Brother All in One Printer are too light, and you are making copies, turn Toner Save mode to off in the machine menu setting. You can also set Toner Save mode to off in the Advanced tab in the printer driver.
What to do if my Brother All in One Printer is not printing and the status LED is yellow?
If your Brother All in One Printer is not printing or has stopped printing and the machine’s status LED is yellow, press Job Cancel. The machine will cancel the job and clear it from the memory, and it may produce an incomplete printout. Try to print again.
Why does my Brother All in One Printer print some pages with missing text?
If your Brother All in One Printer is printing the first couple of pages correctly, then some pages have text missing, make sure that you connected the interface cable correctly.
Why does my Brother DCP 8060 All in One Printer print with toner specks?
If your Brother All in One Printer is producing examples of poor print quality such as toner specks, make sure that you use paper that meets the printer's specifications, as rough-surfaced paper may cause the problem. Clean the primary corona wire and the drum unit. If the print quality has not improved, put in a new drum unit.
What to do if my Brother DCP 8060 does not load paper?
If your Brother All in One Printer doesn't load paper and the LCD shows ‘No Paper’ or a ‘Paper Jam’ message, first, ensure that there is paper in the tray. If the tray is empty, load a new stack of paper. If paper is already loaded, check that it is aligned straight and is not curled. Try removing the paper, turning the stack over, and placing it back in the tray. Also, reduce the amount of paper in the tray. Finally, ensure that the MP tray mode is not selected in the printer driver.
Why does my Brother All in One Printer print all black pages?
If your Brother All in One Printer prints all black pages, clean the primary corona wire on the drum unit. If the problem persists, the drum unit may be damaged, so replace it with a new one.
Why does my Brother All in One Printer print with white or black spots?
If your Brother All in One Printer is producing white or black spots on black text and graphics at 94mm intervals, dust, paper powder, glue, or other substances may be stuck to the surface of the photosensitive drum. Make a few copies of a blank, white sheet of paper. If you still see the spots on printed documents after making multiple copies, clean the drum unit. If the print quality still has not improved you need to install a new drum.
What to do if I cannot install the software for my Brother DCP 8060?
If you cannot install software or print with your Brother All in One Printer, run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair and reinstall the software.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Scan to | e-mail, file, image, OCR |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4, 9, 16 |
| Copy speed (black, normal quality, A4) | 28 cpm |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Internal memory | 32 MB |
| Maximum internal memory | 544 MB |
| Sound power level (standby) | 4.6 dB |
| Sound pressure level (printing) | 7 dB |
| Display | LCD |
| Market positioning | Business |
| Standard interfaces | USB 2.0 |
| Font styles | 66 Scaleable fonts, Letter, Gothic 16.66, OCR-A, OCR-B, 11 Barcodes |
| Dimensions (WxDxH) | 531 x 450 x 475 mm |
| All-in-one functions | Copy, Scan |
| Compatible operating systems | Windows98(SE)/Me/2000/XP/XP Professional x64 Edition Windows NT4.0WS Mac OS 9.1-9.2/ OS X 10.2.4 or greater |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 85 W |
| Power consumption (PowerSave) | 15 W |
| Power consumption (average operating) | 1104 W |
| Package weight | 22600 g |
Steps for printing documents and using duplex (two-sided) printing.
Procedures for scanning documents using TWAIN and WIA drivers on Windows.
Scanning documents to various destinations like E-mail, Image, OCR, or File.
Setting up SCAN buttons for different scan actions and destinations.
Steps to configure and use the machine for network scanning.
Configuring and sending faxes using the PC-FAX software.
General scanning procedures and accessing the scanner on Macintosh.
Steps to configure and use the machine for network scanning on Macintosh.
To Next Page
