EasyManuals Logo

Brother DCP-B7500D Service Manual

Brother DCP-B7500D
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #301 background imageLoading...
Page #301 background image
5-29
Confidential
1.3.14 Transfer received fax data / log information (fax models only)
(Function code 53)
<Function>
When the machine is unable to print the received fax data due to an error in the printing
mechanism, this function is used to transfer the data to another machine. The
communication management report, communication list, or machine log information can also
be transferred.
<Operating Procedure>
(1) Press the [5], and then the [3] in the initial state of maintenance mode. “FAX
TRANSFER” is displayed on the LCD.
To check the number of files received, press the [1].
“1. NO. OF JOBS” is displayed on the LCD.
Press the [SET] or [OK], and the number of files received is displayed, for example,
“NO. OF JOBS: 10”.
To transfer only the communication management report, press the [2].
“2. ACTIVITY” is displayed on the LCD.
To transfer the received data, press the [3].
(The communication management report is also transferred.)
“3. DOCUMENTS” is displayed on the LCD. If there are no received files, “NO
DOCUMENTS” is displayed.
To transfer the communication list (latest communication information), press the [4].
“4. COM.LIST (NEW)” is displayed on the LCD.
To transfer the communication list (information for the past three errors), press the
[5].
“5. COM.LIST (ERR3)” is displayed on the LCD.
To transfer the maintenance information (list printed by function code 77), press the
[6].
“6. MNT77LIST” is displayed on the LCD.
(2) Press the [SET] or [OK] while either “2.ACTIVITY”, “3.DOCUMENTS”, “4.COM.LIST
(NEW)”, “5.COM.LIST (ERR3)”, or “6.MNT77LIST” is displayed on the LCD. “ENTER
NO. & SET” is displayed on the LCD.
(3) Enter the telephone number of the receiver machine, and press the [SET] or [OK] again.
(4) “Accepted” is displayed for approximately two seconds, and the machine starts dialing to
transfer the received data.
Note:
The number of files that can be transferred in one operation is up to 99. When there are
100 or more files, the operation procedure below must be performed several times to
transfer all files.
When there are both color data files and monochrome data files, monochrome data files
are transferred first. When the color function is not supported by the receiver machine,
color data files cannot be transferred and an error occurs.
Note:
Be sure to enter the telephone number directly using the numerical keys. One-touch dialing
is not allowed in this procedure.
No station ID will be attached to the data to be transferred. Instead, a cover page and end
page as shown on the next page will be automatically attached.

Table of Contents

Other manuals for Brother DCP-B7500D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-B7500D and is the answer not in the manual?

Brother DCP-B7500D Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Duplex printing modeAuto
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)34 ppm
Printing colorsBlack
Duplex functionsPrint
Maximum duty cycle15000 pages per month
Number of print cartridges1
Page description languagesBR-Script 3, PCL 6, PDF 1.7
Copier resize25 - 400 %
Duplex copying-
Maximum copy resolution600 x 600 DPI
Maximum number of copies99 copies
Scan toE-mail, File, Image
Input color depth30 bit
Output color depth24 bit
Input grayscale depth10 bit
Output grayscale depth8 bit
Optical scanning resolution1200 x 1200 DPI
FaxingNo
Total input capacity250 sheets
Total output capacity120 sheets
Paper tray media typesPlain paper, Recycled paper, Thin paper
Paper tray media weight60 - 230 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product colorGray
Market positioningHome & office
Mac operating systems supportedMac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 10.2 Jaguar, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.03 W
Power consumption (ready)42 W
Power consumption (sleep)6.2 W
Power consumption (printing)485 W
Weight and Dimensions IconWeight and Dimensions
Depth398.5 mm
Width410 mm
Height272 mm

Related product manuals