App. 2-1
Confidential
APPENDIX 2 DELETING USER SETTING
INFORMATION
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
For models without touch panel
(1) Press the [Menu] while the machine is
in the ready state.
(2) Press the [▲] or [▼] to display “Initial
Setup” on the LCD, and press the
[OK].
(3) Press the [▲] or [▼] to display
“Reset” on the LCD, and press the
[OK].
(4) Press the [▲] or [▼] to display
“Machine Reset” on the LCD, and
press the [OK].
“Machine Reset ▲Reset ▼Exit”
appears on the LCD, and press the
[▲].
(5) “Reboot OK? ▲Yes ▼No” appears on
the LCD. Press the [▲] to delete the
user setting information and return the
machine to the ready state.
For models with touch panel
(1) Press the [Settings] while the
machine is in the ready state.
(2) Press the [ALL Settings] on the LCD.
(3) Press the [Initial Setup] on the LCD.
(4) Press the [Reset] on the LCD.
(5) Press the [Machine Reset] on the
LCD.
(6) “Factory Reset? It may take time until
reset finishes. Yes No” appears on the
LCD. Press the [Yes].
(7) “Machine will reboot after resetting.
Press [OK] for 2 seconds to confirm.”
appears on the LCD. Press and hold
the [OK] for 2 seconds or longer to
delete the user setting information
and return the machine to the ready
state.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
