6. Replacing Parts
5.
Move the Wiper Cleaner
slightly to the left (1-2 mm) to release the claw in the left. Pay attention not to tilt
the Wiper Cleaner or the waste ink may drop. Keep flat and move slowly.
<Note>
Do not tilt the Wiper Cleaner, ink may get on your hands or clothing.
0059Y
6. Pick the plastic bag on your right hand with your left hand, and wrap the Wiper Cleaner with the plastic
bag.
GT-3 Series
174
0060Y
7. Remove the wrapped Wiper Cleaner carefully, not to drop waste ink and dispose in according with local
regulations.
0061Y
<Note> Pay attention not to soil the Timing Belt and the other parts with waste ink.
To Next Page
Loading...
