Brother GT-3 Series - Panel PCB Assy

6. Replacing Parts
6-2-14. Panel PCB Assy
Disassemble
1. Remove the Cover DR (right side). (Refer to “6-1-2. Assembling/Disassembling of the Covers”.)
2. Remove the Cover PF. (Refer to “6-2-13. Panel Body Assy”.)
3. Rotate the Print Button (1) counterclockwise with pushing to remove the green part.
(1)
4. Loo
sen the two Screws (2) on the both side of the Panel Body Assy.
(2)
(2)
5. Remove the t
wo Screws (3) at the bottom of the Panel Body Assy.
(3)
GT-3 Series
332