Brother GT-3 Series - Assignment of GT-3 S IP Address

2. Setting up GT-3 Series
2-5-4-2. Assignment of GT-3’s IP Address
Assign the GT-3’s IP address after you finish assigning your computer’s IP address.
1. Turn ON the GT-3 with your PC and GT-3 are connected with USB 2.0 cable. Execute the GT-3 Maintenance and
select [ IP address Assignment ]. Click the [ Next ] Button.
2.
Assign the defined number of IP
address, Subnet mask and Default gateway to GT-3,and click [ OK ] button. (The
numbers below are examples.)
GT-3 Series
31