Brother GT-3 Series - Page 340

6. Replacing Parts
5.
Remove the
Harness: Panel COM (4) and the Harness: Main USB (5) from the two connectors of the
Panel Body.
GT-3 Series
331
6. Remove the one connector (6) and the two Faston Terminals (7) connected in the Control Box Assy.
7. Remove the two Screws (8) that fix the Ground Wires. Remove the Cover (9) by loosing the Screw (10).
8. Remove the Panel Body Assy.
9. Follow the reverse steps in reassembling.
(
4
)
(
5
)
(6)
(7)
(8)
(9)
(9)
(9)
(10)
(10)