Brother GT-3 Series - Page 19

1. About GT-3 Series
10 GT-3 Series
Menu Content
Printer Setting
Goes into the Printer Setting.
LCD Contrast: Adjusts the Display contrast.
See "3-4-1. Adjusting the Display Contrast" in the Instruction Manual.
Speaker Volume: Adjusts the speaker volume. See "3-4-2. Adjusting the
Speaker Volume" in the Instruction Manual.
Temperature: Sets Fahrenheit / Centigrade. See "3-4-3. Temperature" in the
Instruction Manual.
Auto Cleaning Interval: See "7-2-5. Changing the Auto Cleaning Setting " in the
Instruction Manual.
CR Speed Adjustment: Adjusts the increase/decrease of the Carriage speed.
See "7-2-9. Adjusting the CR Speed" in the Instruction Manual.
Flushing Interval: Adjusts the number of lines (interval) to flush ink in printing.
See "7-2-10. Adjusting the Flushing Interval" in the Instruction Manual.
Flushing Volume: Adjusts the ink volume in flushing. See "7-2-11. Adjusting the
Flushing Volume" in the Instruction Manual.
Daily Cleaning W Setting: Adjusts the amount of White Ink that is flushed in Daily
Cleaning White. See "7-2-12. Adjusting the amount of White Ink in Daily
Cleaning White" in the Instruction Manual.
Auto Job Delete: Deletes the print data automatically after the print number
which is set with Printer Driver is finished. Default is OFF.
GT-341 mode (No White): Sets the printer to stop all the operation of White
Heads. See "6-2-５. Required Maintenance for the Long Storage" in the
Instruction Manual.
Total Print Shows the number of prints.
Platen Reset Restores the Platen.
Language
Sets the language shown on the display. See "3-4-4. Language" in the Instruction
Manual.
Version Shows versions of the firmware.