Brother GT-3 Series - Page 259

6. Replacing Parts
8.
Remove the t
wo Screws (1).
<Note> Do not drop the Holder Plate (2) in operation.
(1)
(2)
9.
Remove the one screw (3) and remove the Tube Holder Outside (4).
(3)
(4)
10. Shift the Tube from the U
groove (5) in the Tube Holder Inside.
<Note> Hold the Tube Holder Outside (4) temporarily with TAPTITE Band P M3X8 (3) to prevent Tubes
from slipping.
(5)
GT-3 Series
250