Brother GT-3 Series - Page 261

6. Replacing Parts
<Removi
ng the two Clamps NK-18N (11) and the two Tube Holder Fixes (12)>
(B)
(A)
(12)
(11)
(C)
(11)
(12)
<Note>
Do not drop Two Washer Plains M4 (14)
14.
Remove the one Screw (13) and remove the Clamp NK-18N (11).
<Note> Do not drop the two Washer Plains M4 (14) at the bottom.
(A)
(11)
(14)
(13)
15.
Remove the two Screws (15) and remove the Tube Holder Fix (12).
(15)
(12)
GT-3 Series
252