6. Replacing Parts
4.
Remove the
Tube and the Filter from the Joint VRFE6 (3).
<Note>
Hold the Fitting position of the Tube and rotate it to the direction of the arrow.
Pay attention to the tubes not to drop; spread some paper or cloth to absorb ink.
(3)
5.
Disco
nnect the Filter from the Tube by rotating the direction of the arrow.
GT-3 Series
265
Assembling
1.
Prepa
re the assembly of the new Tube and the new Filter. Rotate the Joint by 30-40 degrees where you
insert. Hold the Tubes and Filters gently.
<Note> Do not twist or push in, otherwise the Joint may be damaged.
To Next Page
Loading...
