6. Replacing Parts
4.
Remove the four Scre
ws (5) that fix the Ink Switch 1 Bracket, where the Ink Switch PCB Assy is mounted.
(5)
(5)
5. Move the Ink
Switch 1 Bracket (6) along with the Tubes, with the Ink Switch PCB Assy mounted, and
remove it after it is above the Cartridges.
(6)
6. Disassem
ble the Ink Switch PCB Assy by removing the six Screws (7) that fix the Ink Switch PCB Assy.
(7)
7. Follow the
reverse steps in reassembling.
GT-3 Series
341
To Next Page
Loading...
