HE-800C
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
30
(16) AUTO key
This key is used to switch to automatic sewing
mode.
The “AUTO” indicator in the key illuminates when
automatic sewing mode is active.
(17) TEST key
This key is used to switch to test feeding mode.
The “TEST” indicator in the key illuminates when test
feeding mode is active.
(18) PROGRAM key
This key is used to start program mode.
The “PROGRAM” indicator in the key illuminates
when program mode is active.
(19) MEMSW (memory switch) key
This key is used to switch to memory switch mode.
The “MEMSW” indicator in the key illuminates when
memory switch mode is active.
(20) R/W (read/write) key
This key is used to switch to data read/write mode.
The “R/W” indicator in the key illuminates when data
read/write mode is active.
(21) THREAD key
This key is used to switch to threading mode.
The “THREAD” indicator in the key flashes when
threading mode is active.
(22) CUTTER ON key
This key is used to switch cutter operation between
enabled and disabled.
The “CUTTER ON” indicator in the key illuminates
when cutter operation is enabled.
(23) WIND (thread winding) key
This key is used to switch to lower thread winding
mode.
The “WIND” indicator in the key illuminates when
lower thread winding mode is active.
(24) COPY key
This key is used to switch to copy mode.
The “COPY” indicator in the key flashes when copy
mode is active.
(25) FUNC (function) key
This key is used to display the help screen.
(26) SD card slot
This is the slot for the SD card.
4207B
To Next Page
Loading...
