Brother HE-800C - Operating the Treadle

HE-800C
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
32
5-3. Operating the treadle
1. When the treadle is not depressed (A), the work clamp is at the neutral position. (Figure [1])
2. When the treadle is depressed to the 1st step (B), the work clamp will drop. (Figure [2])
When the treadle is released, the work clamp will return to the neutral position. (Figure [1])
3. When the treadle is depressed to the 2nd step (C), the machine starts sewing. (Figure [3])
4. When the treadle is depressed backward to the backward position (D), the work clamp will lift up to higher than the neutral
position. (Figure [4])
This is useful for inserting and removing the material.
* The work clamp rises while the treadle is being depressed backward, and it returns to the neutral position when the treadle
is released.
Depressed backward
position
(Insertion and removal o
f
the material
)
Neutral position
Treadle 1st step
(when positioning the
material)
[1]
A
fter sewing
[2]
[3]
[4]
Treadle 2nd step
(when starting)
<
Work clamp>
<Treadle>
3906Q