Brother HE-800C - Cleaning the Eye Guard; Checking the Needle; Cleaning the Length Feed Plate

HE-800C
8. CLEANING
64
8-4. Cleaning the eye guard
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
8-5. Checking the needle
Always check that the tip of the needle is not broken and
also the needle is not bent before starting sewing.
8-6. Cleaning the length feed plate
Clean the length feed plate (1) if foreign materials such as
shavings start getting onto the material.
1. Loosen the two bolts (2), and then remove the length
feed plate (1).
2. Clean the underside of the length feed plate (1) and the
needle plate (3).
4877M
3971Q
4876M