Brother HL-2250DN - Page 149

5-4
Confidential
Open Twice Once 18) Printing for Maintenance 5-9
Twice 19) Maintenance and Frame
Pattern Print
*3
5-11
Three times 20) Network Configuration
Print (Network Model
Only)
*2
5-11
Four times 21) Sleep Mode Setting (ON/
OFF)
5-11
Five times 22) Develop Roller Counter
Reset (For the starter
toner cartridge)
5-11
Six times 23) Develop Roller Counter
Reset (For the standard
toner cartridge)
5-11
Seven times 24) Develop Roller Counter
Reset (For the high-
capacity toner cartridge)
5-11
Eight times 25) USB Speed Fix Mode 5-11
Nine times 26) Sleep Mode Indication
(OFF/Dimmed)
5-11
More than ten times Shift to ready state
Three times Once Factory use (not used)
Twice Factory use (not used)
Three times Factory use (not used)
Four times Factory use (not used)
Five times Factory use (not used)
Six times Factory use (not used)
Seven times Factory use (not used)
Eight times Invalidity
Nine times 27) Inspection Mode Unlock 5-12
Ten times Factory use (not used)
Eleven times Invalidity
Twelve times Factory use (not used)
More than thirteen
times
Shift to ready state
Four times None Factory use (not used)
Five times Once Factory use (not used)
More than six times Invalidity
More than 2 seconds 28) PIT3 Mode 5-12
CAUTION :
*1 Start the test printing, when the function is performed with HL-2130/2220/2230/2240.
*2 Start the test printing, when the function is performed with HL-2130/2220/2230/2240/2240D.
*3 Start the Maintenance printing, when the function is performed with the models of the
non-installing duplex.
*4 Start the test printing, when the function is performed with HL-2130/2135W/2220/2230/2240/
2240D.
Front
cover
Press the [Go] button
when sifting the mode
Press the [Go] button
when selecting the
function
Function
Refer
to: