To Next Page
D
Derrick NavarroSep 13, 2025
Why is my Brother HL-2270DW double feeding?
- CCarolyn SmithSep 14, 2025
If your Brother printer is double feeding, the paper feeding kit may be failing and needs to be replaced.
Why is my Brother HL-2270DW double feeding?
If your Brother printer is double feeding, the paper feeding kit may be failing and needs to be replaced.
Why is my Brother HL-2270DW Printer showing a paper size error?
If your Brother printer is displaying a paper size error, it could be due to: * The registration front actuator catching. Correct its position. * The main PCB might be faulty and need replacement.
Why can't my Brother Laser printer print full pages with PRINT OVERRUN error?
If your Brother Laser printer cannot print full pages and displays a 'PRINT OVERRUN' error, press Go to print the remaining data in the machine memory. Cancel the print job if you want to delete the remaining data in the machine memory. Reduce the complexity of your document or select a lower print resolution.
Why does my Brother All in One Printer say 'Cooling Down, Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down, Wait for a while', it means the drum unit or toner cartridge is too hot, and the machine has paused to cool down. Make sure you can hear the fan spinning and that the exhaust outlet isn't blocked. If the fan is spinning, remove any obstacles around the exhaust outlet and let the machine sit for several minutes. If the fan isn't spinning, disconnect the machine from the power outlet for several minutes, then reconnect it.
How to solve fuser error on Brother All in One Printer?
A 'Fuser Error' on your Brother All in One Printer indicates that the fuser unit's temperature isn't rising correctly. Turn the printer off, wait a few seconds, and then turn it back on. Leave the machine powered on for 15 minutes.
How to remove dirt on paper from Brother HL-2270DW?
If you're seeing dirt on the paper from your Brother printer, the fuser unit might be dirty. Try cleaning the entrance of the fuser unit, or clean the pressure roller.
What causes paper size error on Brother Printer?
If your Brother printer is displaying a paper size error, the registration front actuator might be catching, which needs to be corrected. Alternatively, the main PCB could be failing and would need to be replaced.
What does TONER LOW mean on my Brother Laser printer?
If your Brother Laser printer displays 'TONER LOW', buy a new toner cartridge and have it ready for when the REPLACE TONER status is indicated.
What does TONER ENDED mean on my Brother Laser printer?
If your Brother Laser printer indicates 'TONER ENDED', replace the toner cartridge with a new one.
What to do if my Brother Laser printer says NO TONER?
If your Brother Laser printer displays 'NO TONER', open the front cover, then install the toner cartridge.
General| Color | No |
|---|---|
| N-up printing | 2, 4, 9, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 27 ppm |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Maximum duty cycle | - pages per month |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Wi-Fi standards | 802.11b, 802.11g |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA-PSK, WPA-TKIP, WPA2-PSK |
| Sustainability certificates | ENERGY STAR |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 495 W |
| Power consumption (PowerSave) | 0.9 W |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package weight | 8300 g |
| Standard interfaces | Ethernet, USB 2.0, Wireless LAN |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Server operating systems supported | Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
