Brother HL-5270DN Network User's Guide

Control panel setup
8 - 10
8
■ PASSWORD
If you have selected LEAP for an authentication mode, you will need to enter a password that is 32
characters or less in length.
■ APPLY
In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS
sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used
unless you switch the printer off and then on again.
NETBIOS/IP
You can enable and disable the NetBIOS facility to obtain the IP address.
SET DEFAULT
You can restore the WLAN menu settings to factory default.

Brother HL-5270DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Maximum internal memory	544 MB
Number of print cartridges	1
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv4, IPv6
Networking features	Ethernet 10/100Base-TX
Power consumption (active)	610 W
Display	LCD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	80 W
Power consumption (PowerSave)	9 W

Weight and Dimensions

Dimensions (WxDxH)	393 x 384 x 259 mm