EasyManuals Logo

Brother HL-5270DN Network User's Guide

Brother HL-5270DN
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
10
10 - 1
10
Wireless installation in ad-hoc mode
(HL-5280DW only)
The following instructions will install your Brother printer in a wireless network environment in ad-hoc mode
using the Brother automatic installer application in the CD-ROM we have provided with the printer. If you want
to setup your printer in infrastructure mode, using a wireless router or access point that uses DHCP to assign
IP addresses, you can find instructions in the supplied Quick Setup Guide.
You can also setup your printer using SecureEasySetup
TM
and the printer control panel.
See Using SecureEasySetup
TM
to configure your printer in a wireless network on page 3-4.
See Using the control panel NETWORK menu to configure your wireless network printer (in infrastructure
mode) on page 3-6.
For Windows
®
98/98SE/Me/2000/XP
Note
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall
available in Windows
®
XP), disable it. Once you are sure that you can print, restart your Personal Firewall
software.
Improper Setup
Improper Setup
1
Make sure that the printer power switch is on.
2
Turn on your computer.
3
Put the supplied CD-ROM into your CD-ROM driver. The opening screen will appear automatically.
Choose HL-5280DW and the language.
If you have previously configured the wireless settings of the printer, you must reset the NETWORK
menu settings before you can configure the wireless settings again.
1 Press the + or - button to choose NETWORK. Press Set.
2 Press the + or - button to choose FACTORY RESET. Press Set.
3 Press Set again.
DO NOT connect the interface cable.
Connecting the interface cable is done when installing the driver.

Table of Contents

Other manuals for Brother HL-5270DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5270DN and is the answer not in the manual?

Brother HL-5270DN Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 9, 16, 25
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Maximum internal memory544 MB
Number of print cartridges1
Total input capacity250 sheets
Total output capacity100 sheets
Multi-Purpose tray input capacity50 sheets
Maximum print size210 x 297 mm
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)IPv4, IPv6
Networking featuresEthernet 10/100Base-TX
Power consumption (active)610 W
DisplayLCD
Sustainability certificatesENERGY STAR
Power consumption (standby)80 W
Power consumption (PowerSave)9 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)393 x 384 x 259 mm

Related product manuals