Brother HL-5270DN Network User's Guide

Wireless installation in ad-hoc mode (HL-5280DW only)
10 - 12
10
For Mac OS
®
X 10.2.4 or greater
Note
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation.
Improper Setup
Improper Setup
1 Make sure that the printer power switch is on.
2 Turn on your Macintosh
®
.
3 Put the supplied CD-ROM into your CD-ROM drive, and then double-click the HL-5200 icon on your
desktop.
4 Double-click the Start Here OSX icon. If the
language screen appears, choose your language.
If you have previously configured the wireless settings of the printer, you must reset the NETWORK
menu settings before you can configure the wireless settings again.
1 Press the + or - button to choose NETWORK. Press Set.
2 Press the + or - button to choose FACTORY RESET. Press Set.
3 Press Set again.
DO NOT connect the interface cable.
Connecting the interface cable is done when installing the driver.

Brother HL-5270DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Maximum internal memory	544 MB
Number of print cartridges	1
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv4, IPv6
Networking features	Ethernet 10/100Base-TX
Power consumption (active)	610 W
Display	LCD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	80 W
Power consumption (PowerSave)	9 W

Weight and Dimensions

Dimensions (WxDxH)	393 x 384 x 259 mm