EasyManuals Logo

Brother HL-5270DN Network User's Guide

Brother HL-5270DN
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Troubleshooting
9 - 7
9
Protocol-specific troubleshooting
Windows
®
95/98/Me and Windows NT
®
4.0 Peer-to-Peer print (LPR)
troubleshooting
If you are having trouble printing on a Windows
®
95/98/Me, Windows NT
®
4.0 or later Peer-to-Peer network
(LPR method), check the following:
1
Make sure that the Brother LPR Port driver is correctly installed and configured according to the
Windows
®
95/98/Me or Windows NT
®
4.0 Peer-to-Peer chapters.
2
Try to turn the Byte Count on in the Configure port area of printer driver properties.
You may find that during the installation of BLP software, the screen that prompts you for a Port name is not
displayed. This may happen on some Windows
®
95/98/Me and Windows NT
®
4.0 computers. Press the ALT
and TAB keys to make it appear.
Windows
®
95/98/Me and Windows NT
®
4.0 Peer-to-Peer print (NetBIOS)
troubleshooting
If you are having trouble printing on a Windows
®
95/98/Me, Windows NT
®
4.0 or later Peer-to-Peer network
(NetBIOS), check the following:
1
Make sure that the Brother NetBIOS Port driver is correctly installed and configured according to the
Windows
®
95/98/Me or Windows NT
®
4.0 Peer-to-Peer (NetBIOS) chapters. You may find that during
the installation of the port driver, the screen that prompts you for a Port name is not displayed. This
happens on some Windows
®
95/98/Me and Windows NT
®
4.0 computers. Press the ALT and TAB keys
to make it appear.
2
Make sure that the print server is configured to be in the same workgroup or domain as the rest of your
computers. It may take several minutes for the print server to appear in the network neighborhood.

Table of Contents

Other manuals for Brother HL-5270DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother HL-5270DN and is the answer not in the manual?

Brother HL-5270DN Specifications

General IconGeneral
ColorNo
N-up printing2, 4, 9, 16, 25
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)28 ppm
Maximum internal memory544 MB
Number of print cartridges1
Total input capacity250 sheets
Total output capacity100 sheets
Multi-Purpose tray input capacity50 sheets
Maximum print size210 x 297 mm
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)IPv4, IPv6
Networking featuresEthernet 10/100Base-TX
Power consumption (active)610 W
DisplayLCD
Sustainability certificatesENERGY STAR
Power consumption (standby)80 W
Power consumption (PowerSave)9 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)393 x 384 x 259 mm

Related product manuals