Brother HL-5270DN Network User's Guide

Configuring your wireless network printer (HL-5280DW only)
3 - 6
3
Using the control panel NETWORK menu to configure your wireless network
printer (in infrastructure mode)
You can configure your print server by using the NETWORK menu on the printer’s control panel. See to the
steps below for further information.
1 Press any of the Menu buttons (+, -, Set or Back) to take the printer off-line.
2 Press the + button or the - button to move forward or backward through the menus until NETWORK is
displayed.
3 Press Set.
Press the + button or the - button to select WLAN.
4 Press Set.
Press the + button or the - button to select WIRELESS.
5 Press Set.
Press the + button twice to select COMM.MODE.
6 Press Set.
Press the + button or the - button to select INFRASTRUCTURE.
INFORMATION
NETWORK
WLAN
WIRELESS
COMM.MODE
INFRASTRUCTURE

Brother HL-5270DN Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Maximum internal memory	544 MB
Number of print cartridges	1
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	50 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Bond paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv4, IPv6
Networking features	Ethernet 10/100Base-TX
Power consumption (active)	610 W
Display	LCD
Sustainability certificates	ENERGY STAR
Power consumption (standby)	80 W
Power consumption (PowerSave)	9 W

Weight and Dimensions

Dimensions (WxDxH)	393 x 384 x 259 mm