Wireless installation in ad-hoc mode (HL-5280DW only)
10 - 4
10
10
To communicate with the un-configured wireless
printer, change the wireless settings on this PC to
the printer’s default settings which are shown on the
screen. Check Checked and confirmed, and then
click Next.
Note
■ See the user’s guide of your Network Interface or your PC for how to change the wireless settings.
■ For Windows
®
XP SP2 users
You can change the wireless settings on your PC, following the steps below:
1 Click Start and then Control Panel.
2 Click the Network Connection icon.
Item Record the current wireless computer settings
Communication mode:
(Infrastructure/Ad-hoc)
Channel:
(1-14)
Network name:
(SSID/ESSID)
Authentication method:
(Open system/Shared key)
Encryption:
(None/WEP/Other)
Encryption key:
To Next Page
Loading...
