Wireless installation in ad-hoc mode (HL-5280DW only)
10 - 15
10
11
To communicate with the un-configured wireless
machine, change the wireless settings on your
Macintosh
®
to the machine’s default settings which
are shown on the screen. Check Checked and
confirmed, and then click Next.
Note
■ See the user’s guide of your Network Interface of your Macintosh
®
for how to change the wireless settings.
■ You can change the wireless settings on your Macintosh
®
, following the steps below:
Item Record the current wireless computer settings
Communication mode:
(Infrastructure/Ad-hoc)
Channel:
(1-14)
Network name:
(SSID/ESSID)
Authentication method:
(Open system/Shared key)
Encryption:
(None/WEP/Other)
Encryption key:
To Next Page
Loading...
