Brother MFC-440CN

94
13
How to copy 13
Entering Copy mode 13
When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
1 No of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
 Quality (See page 95.)
 Enlarge/Reduce (See page 96.)
 Paper Type (See page 99.)
 Paper Size (See page 99.)
 Brightness (See page 98.)
 Contrast (See page 98.)
 Color Adjust (See page 98.)
 Stack/Sort (See page 97.)
 Page Layout (See page 96.)
 Set New Default (See page 99.)
 Factory Reset (See page 99.)
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode
Timer on page 23.)
Making a single copy 13
a Press (Copy).
b Load your document.
(See Loading documents on page 10.)
c Press Mono Start or Colour Start.
Making copies 13
COPY
Copy Start Press
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Normal
100%
Plain Pap
A4
0
01
1