EasyManuals Logo

Brother MFC-440CN User Manual

Brother MFC-440CN
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
140
Error messages B
As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error messages are shown below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com
.
Error Message Cause Action
Comm.Error Poor phone line quality caused a
communication error.
Try to send the fax again or try to connect
the machine to another telephone line. If
the problem continues, call the telephone
company and ask them to check your
phone line.
Connection Fail You tried to poll a fax machine
that is not in Polled Waiting mode.
Check the other fax machine's polling
setup.
Cover is Open The scanner cover is not closed
completely.
Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it
clicks.
Data Remaining Print data is left in the machine's
memory.
Re-start printing from your computer.
Print data is left in the machine's
memory. The USB cable was
unplugged while the computer
was sending the data to the
machine.
Press Stop/Exit. The machine will cancel
the job and clear it from the memory. Try to
print again.
Disconnected The other person or other
person's fax machine stopped the
call.
Try to send or receive again.
Document Jam The document was not inserted or
fed properly, or the document
scanned from the ADF was too
long.
See Using the ADF on page 10.
See Document jam on page 144.
DR Mode in Use The machine is set to Distinctive
Ring mode. You cannot change
the Receive Mode from Manual to
another mode.
Set Distinctive Ring to off. (See Turning off
Distinctive Ring on page 52.)
High Temperature The print head is too warm. Allow the machine to cool down.

Table of Contents

Other manuals for Brother MFC-440CN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-440CN and is the answer not in the manual?

Brother MFC-440CN Specifications

General IconGeneral
DisplayLCD
Built-in displayYes
Display diagonal2 \
Market positioningHome & office
Print technologyInkjet
Maximum resolution600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)25 ppm
Print speed (color, normal quality, A4/US Letter)20 ppm
Digital senderNo
Number of print cartridges4
I/O ports1x USB 1x RJ-45
Scan speed6 sec/page
Scan file formatsBMP, PDF, PNG, TIFF
Dimensions (WxDxH)398 x 370 x 180 mm
Networking featuresEthernet 10/100Base-T
All-in-one functionsFax, Scan
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows 98SE/Me/2000/XP/Vista Mac OS X 10.2.4 + Linux
Scanner typeFlatbed scanner
Grayscale levels256
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)18 cpm
Copy speed (color, normal quality, A4)16 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed14.4 Kbit/s
Fax speed dialing (max numbers)80
Maximum print size216 x 297 mm
Paper tray media typesEnvelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF) input capacity10 sheets
Compatible memory cardsMMC, MS Pro, SD, xD
Standard interfacesEthernet, USB 2.0
Bundled softwareMFL-Pro Suite ControlCentre3 ScanSoft Paperport SE ControlCentre2 NewSoft Presto! PageManager7 SYSTRAN WebTranslator 5.0
Package weight10900 g

Related product manuals