Printing photos from a memory card
107
14
PhotoCapture Center™ print settings 14
You can change the print settings temporarily for the next printing.
The machine returns to its default settings 180 seconds, or if the Mode Timer returns the machine
to Fax mode. (See Mode Timer on page 23.)
Note
You can save the print settings you use most often by setting them as default. (See Setting
your changes as a new default on page 110.)
1 No of prints
(For View Photo(s))
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos)
You can see the number of copies of each photo that will be printed.
Menu Selections Option 1 Option 2 Page
Print Quality Normal/Photo — 108
Paper Type Plain Paper/Inkjet Paper/
Brother Photo/Other Photo
— 108
Paper Size Letter/A4/10x15cm/13x18cm (When A4 or Letter is chosen)
10x8cm/13x9cm/15x10cm/
18x13cm/20x15cm/Max. Size
108
Brightness — 109
Contrast — 109
Color Enhance On/Off
White Balance /
Sharpness /
Color Density
Exit
— 109
Cropping On/Off — 110
Borderless On/Off — 110
Set New Default Yes/No — 110
Factory Reset Yes/No — 110
PHOTO
Paper Type
Paper Size
Brightness
Contrast
Other Ph
Print Quality Photo
10x15 cm
0
0
Print Start Press
0001
1
Dark Ligh
To Next Page
Loading...
