Brother MFC-440CN

Dialling and storing numbers
65
8
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last 30
numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minutes interval.
a Press Redial/Pause.
b Press a or b to choose the number you
want to redial.
Press OK.
c Press a or b to choose Send a Fax.
Press OK.
d Press Mono Start or Colour Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Outgoing Call 8
The last 30 numbers you telephoned
(MFC-665CW only) or sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to telephone
(MFC-665CW only), fax to, add to Speed-
Dial, or delete from the history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the number you
want to call.
Press OK.
c Do one of the following:
 (MFC-665CW only)
To make a phone call, press a or b
to choose Make a Phone Call.
Press OK.
 To send a fax, press a or b to
choose Send a Fax.
Press OK.
 If you want to store the number,
press a or b to choose
Add to Speed-Dial.
Press OK.
(See Storing Speed-Dial numbers
from Outgoing Calls on page 67.)
 Press a or b to choose Delete.
Press OK.
Then, confirm the Delete by
pressing 1.