Brother MFC-440CN - Fax Storage

Dialling and storing numbers
67
8
f Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 174.)
 To store the number without a name,
press OK.
g Enter the fax or telephone number (up to
20 digits).
Press OK.
h Do one of the following:
 Enter the second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
i Do one of the following:
 To store another Speed-Dial
number, go to step e.
 To finish the setting, press
Stop/Exit.
Storing Speed-Dial numbers from
Outgoing Calls
8
You can also store Speed-Dial numbers from
the Outgoing Call history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (Fax).
b Press a or b to choose the name or
number you want to store.
Press OK.
c Press a or b to choose
Add to Speed-Dial.
Press OK.
d Press a or b to choose the 2-digit
Speed-Dial location you want to store
the number in.
Press OK.
e Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 174.)
 To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Do one of the following:
 Enter the second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
h Press Stop/Exit.
Storing Speed-Dial numbers from the
Caller ID history
8
If you have the Caller ID subscriber service
from your telephone company you can also
store Speed-Dial numbers from incoming
calls in the Caller ID History. (See Caller
ID on page 53.)
a Press (Fax).
b Press a or b to choose
Caller ID hist..
Press OK.
c Press a or b to choose the number you
want to store.
Press OK.
d Press a or b to choose
Add to Speed-Dial.
Press OK.
e Press a or b to choose the 2-digit
Speed-Dial location you want to store
the number in.
Press OK.