Brother MFC-440CN - 8 Dialling and Storing Numbers; How to Dial; Manual Dialling; Speed-Dialling

64
8
How to Dial 8
Manual dialling 8
Press all of the digits of the fax or telephone
number.
Speed-Dialling 8
a Press Search/Speed Dial.
MFC-440CN
8
MFC-665CW 8
You can also choose Speed-Dial by
pressing (Fax).
b Press the two-digit Speed-Dial number.
(See Storing Speed-Dial
numbers on page 66.)
c If you have two numbers in the location,
press a or b to choose the number you
want to call.
Press OK.
Note
If the LCD shows Not Registered
when you enter a Speed-Dial number, a
number has not been stored at this
location.
Search 8
You can search for names you have stored in
the Speed-Dial memory.
a Press Search/Speed Dial.
You can also choose Speed-Dial by
pressing (Fax).
b Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
Note
• Press l to make the LCD font size larger.
•Press # to make the LCD font size smaller.
c If you chose Alphabetical Order in
step b, use the dial pad to enter the first
letter of the name, and then press a or
b to choose the name and number you
want to call.
Press OK.
Dialling and storing numbers 8