Brother MFC-440CN

Digital TAD (MFC-665CW only)
73
9
Listening to your OGM 9
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup Msg
Ctr.
Press OK.
d Press a or b to choose OGM.
Press OK.
e Press a or b to choose Msg Ctr OGM
or F/T OGM.
Press OK.
f Press a or b to choose Playing OGM.
Press OK.
Adjust the volume by pressing Volume
d or c .
g Press Stop/Exit.
Erasing your OGM 9
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup Msg
Ctr.
Press OK.
d Press a or b to choose OGM.
Press OK.
e Press a or b to choose Msg Ctr OGM
or F/T OGM.
Press OK.
f Press a or b to choose Erase MSG.
Press OK.
g Do one of the following:
 Press 1 to erase the OGM.
 Press 2 to exit without erasing.
h Press Stop/Exit.
Fax/Tel OGM 9
If your machine is set to Fax/Tel receive
mode this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message.
To record your Fax/Tel OGM follow the
instructions on Outgoing message
(OGM) on page 72.
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
modes on page 42.
Activating TAD mode 9
When the light glows, TAD mode is
active. Press to enter TAD mode.