Brother MFC-440CN - Cancelling a Broadcast in Progress; Additional Sending Operations; Sending Faxes Using Multiple Settings

Sending a fax
37
5
Cancelling a Broadcast in
progress 5
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
d Press OK.
The LCD will ask you the following
message:
Cancel Job?
YesiPress 1
NoiPress 2
e Press 1 to clear the number being
dialled.
The LCD will then show the Broadcast
job number.
f Press OK.
The LCD will ask you the following
message:
Cancel Job?
YesiPress 1
NoiPress 2
g Press 1 to cancel the Broadcast.
h Press Stop/Exit.
Additional sending
operations 5
Sending faxes using multiple
settings 5
When you send a fax, you can choose any
combination of these settings: resolution,
contrast, overseas mode, delayed fax timer,
polling transmission and real time
transmission.
a Press (Fax).
The LCD shows:
b Press a or b to choose any settings
you want to change.
Press OK.
c After each setting is accepted, you can
continue to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 40.)
09012345689
FAX
Fax Start
Press
Fax Resolution Standard
Contrast Auto
Speed-Dial
Outgoing Call