Brother MFC-440CN

Chapter 13
96
Enlarging or reducing the
image copied 13
You can choose an enlargement or reduction
ratio.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Enlarge/Reduce.
Press OK.
e Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
 Press a or b to choose
Custom(25-400%)and then enter
an enlargement or reduction ratio
from 25% to 400%. Press OK.
(For example, press 53 to enter
53%.)
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout Options are not available
with Enlarge/Reduce.
Making N in 1 copies or a
poster (page layout) 13
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to make a poster, use the
scanner glass.
Important
 Please make sure paper size is set to
Letter or A4.
 You can not use the Enlarge/Reduce
setting with the N in 1 and Poster features.
 If you are producing multiple colour
copies, N in 1 copy is not available.
 (P) means Portrait and (L) means
Landscape.
 You can only make one poster copy at a
time.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose Off
(1 in 1), 2in1(P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L)or Poster(3×3).
Press OK.
50%
69% A4iA5
78% LGLiLTR
83% LGLiA4
93% A4iLTR
97% LTRiA4
100%*
104% EXEiLTR
142% A5iA4
186% 10×15cmiLTR
198% 10×15cmiA4
200%
Custom(25-400%)