Brother MFC-440CN

160
General Setup
(Continued)
P.Save Setting — Fax Receive:On *
Fax Receive:Off
Customizes the
Power Save key to
receive faxes even in off
mode.
22
LCD Settings LCD Contrast Light
Med*
Dark
Adjusts the contrast of the
LCD.
27
Backlight Light*
Med
Dark
You can adjust the
brightness of the LCD
backlight.
27
Dim Timer Off
10 Secs
20 Secs
30 Secs*
You can set how long the
LCD backlight stays on
after the last key press.
27
Off Timer Off*
1 Min
2 Mins
3 Mins
5 Mins
10 Mins
30 Mins
You can set how long the
LCD stays on for after the
last key press.
28
Wallpaper — You can choose the
wallpaper of the LCD.
Fax Setup Receive Ring Delay
(MFC-440CN
only)
2-10(2*)
(Example for
Australia)
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
45
Ring Delay
(MFC
-665CW
only)
Ring Delay
2-10(2*)
(Example for
Australia)
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
45
Toll Saver
On
Off*
Cost saving feature: the
machine rings 2 times if
there are messages and 4
times if there are no
messages, so you can
hang up and not pay for
the call.
75
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.