Brother MFC-440CN

Advanced fax operations (Monochrome only)
85
10
97 Check the receiving status
(MFC
-665CW only)
1 Fax You can check whether your machine has received any
faxes or voice messages. If yes, you will hear one long
beep. If no, you will hear three short beeps.
2 Voice
98 Change the Receive Mode
(MFC-440CN only)
1 External TAD If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
98 Change the Receive Mode
(MFC
-665CW only)
1 Msg Ctr If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90 Exit Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
Remote commands Operation details