AUTO DIAL NUMBERS AND DIALING OPTIONS
7 - 6
BHL-FB-MFC-5100C-FM5.5
Pause
Press Redial/Pause to insert a 3.5 second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
try again. Anytime you want to make a second call to the last number dialed,
press Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the MFC will redial
automatically up to three times at five minute intervals.
Tone/Pulse (For Canada Only)
If you have Pulse dialing service, but need to send tone signals (for example, for
telephone banking), follow the directions below. If you have Touch Tone
service, you will not need this feature to send tone signals.
1
Lift the handset of an external phone.
2
Press #. Any digits dialed after this send tone signals.
3
When you hang up, the MFC returns to pulse dialing service.
To Next Page
Loading...
