Brother MFC-5100C - Adding a New Group

USING THE BROTHER MFC WITH A NEW POWER MACINTOSH
®
G3, G4 OR IMAC™/IBOOK™ 17 - 6
Adding a New Group
You can set up a group of multiple recipients.
1 Click Group .
The Group Setting dialog box appears.
2 In the Group Name field, type a name for your Group.
3 From the Stored Fax Numbers box select the recipients for your Group, and
then click .
Your selection will appear in the box under the
Group Name field.
4 Click OK .
The Address Book dialog box reappears:
5 Click OK .
The Print/Facsimile dialog box reappears:
6 If you are ready to send your fax, click Send Fax .
(Follow the steps on page 17-3 for sending a fax.)