MAKING COPIES
10 - 1
10
BHL-FB-MFC-5100C-FM5.5
10
Making Copies
Basic Copy Operations
Your MFC allows you to make high-quality photocopies and transparencies.
Copies can be in black and white, or full color. Always make sure you have
paper in the cassette before making copies. Do not pull on the paper while
copying is in progress.
Making a Single Copy
1
Place the original face up in the ADF, or face down on the scanner glass.
2
As needed, use Options and Reduce/Enlarge to change the settings.
3
Press Black Copy or Color Copy.
Making Multiple Copies (Using the ADF)
You can make multiple copies using the ADF. Multiple copies will be stacked or
sort. Use the Options key to select SORT
(See
Using the Options Key
, page 10-5
.)
1
Place the original face up in the ADF.
2
Using the dial pad, enter the number of copies you want (up to 99).
For example, press 3 8 for 38 copies.
3
Press Black Copy or Color Copy.
Incoming faxes cannot be received on paper or into memory while the MFC is
copying.
If the original is a post card, place it on the scanner glass. Post cards can NOT
be fed through the ADF.
Note
To stop the copy process and release the original, press Stop/Exit.
To sort the copies, use the Options key. (See Using the Options Key, page 10-5.)
Sorting color copies uses more memory and depends upon the data.
If you selected GLOSSY in the Paper Type Setting, Multiple Copies (Using the
ADF) are not available.
Copy Keys
COPYING P.01
To Next Page
Loading...
Need help?
General
