Chapter 1
4
Mode Timer
1
The machine has three mode keys on the
control panel: FAX, SCAN, and COPY.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you choose Off, the
machine will stay in the mode you used last.
This setting also sets the time the machine
will change from individual user to the Public
mode when using Secure Function Lock.
(See Switching Users on page 10.)
a Press Menu, 1, 1.
b Press a or b to choose 0 Sec, 30
Secs, 1 Min, 2 Mins, 5 Mins or Off.
Press OK.
c Press Stop/Exit.
Setting the Fax Logic
(sending and receiving
sequence)
1
You can change the process of manual fax
send or receive.
If you often send or receive a fax manually
to/from the other party at the end of a
conversation, set the Fax Mode to
Easy Mode.
If you set to Easy Mode:
You can send or receive a fax manually just
simply press Start.
Make sure the other party’s machine is ready
to send or receive a fax.
If you are a caller, press Start to send a fax.
If you are a receiver, press Start to receive a
fax.
If you set to Advanced Mode:
No matter you are a caller or receiver, you
can choose you will send or receive a fax
manually. When you press Start, the
machine will ask you to choose 1.Send or
2.Receive.
If you want to send a fax, press 1 to send a
fax.
If you want to receive a fax, press 2 to receive
a fax.
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Start.
a Press Menu, 2, 0, 2.
b Press a or b to choose Easy Mode or
Advanced Mode.
Press OK.
c Press Stop/Exit.
To Next Page
Loading...
Need help?
General
