Security features
11
2
• If the function you want to use is restricted
for all users, Not Available will appear
on the LCD and then the machine will go
back to the Ready mode. You cannot
access to the function you want to use.
Contact your administrator to check your
Secure Function Lock Settings.
• If your ID has set page limit restrictions
and already reached the maximum
number of pages, the LCD will show
Limit Exceeded when you print data.
Contact your administrator to check your
Secure Function Lock Settings.
Setting Lock 2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or your Brother dealer.
While Setting Lock is On, you cannot change
the following settings without a password:
Mode Timer
Paper
Volume
Ecology
LCD Contrast
Security
Document Scan
Replace Toner
Address Book
Dial Restrict
Printer (Emulation
1
, Duplex
1
, Reset
Printer)
Network settings (except Status, Mac
Address, Scan to FTP
2
, Scan to E-mail
2
)
Receive Mode
Date&Time
Station ID
Tone/Pulse
Dial Tone
Dial Prefix
Reset
1
For MFC-7470D / MFC-7860DN
2
For MFC-7860DN
Also, machine settings cannot be changed
through the Remote Setup while Setting Lock
is On.
To Next Page
Loading...
Need help?
General
