Brother MFC-7360 User Guide

Chapter 2
12
Setting up the password 2
a Press Menu, 1, 6, 2.
b Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c Re-enter your password when the LCD
shows Verify:.
Press OK.
d Press Stop/Exit.
Changing your Setting Lock
password
2
a Press Menu, 1, 6, 2.
b Press a or b to choose Set Password.
Press OK.
c Enter your four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e Re-enter your new password when the
LCD shows Verify:.
Press OK.
f Press Stop/Exit.
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a Press Menu, 1, 6, 2.
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning Setting Lock off
a Press Menu, 1, 6, 2.
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.

Brother MFC-7360 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Fax Modem Speed	33.6 Kbps
Duplex Printing	Manual
Memory	32 MB
Print Speed (Black)	24 ppm
Print Resolution	2400 x 600 dpi
Copy Speed (Black)	24 cpm
Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution (Interpolated)	19200 x 19200 dpi
Paper Capacity	250 sheets
ADF Capacity	35 sheets
Connectivity	USB 2.0
Display	LCD
Dimensions (W x D x H)	16.1 x 16.3 x 12.4 inches