1
1
1
Memory Storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast, Overseas Mode) will be lost.
(For MFC-7470D / MFC-7860DN)
During a power failure the machine will retain
the date and time and programmed fax timer
jobs (fx. Delayed Fax) for approximately 60
hours. Other fax jobs in the machine’s
memory will not be lost.
(For MFC-7360)
During a power failure the machine will retain
the date and time for approximately 2 hours.
The fax jobs in the machine’s memory will be
lost.
Ecology features 1
Toner Save 1
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a Press Menu, 1, 4, 1.
b Press a or b to choose On or Off.
Press OK.
c Press Stop/Exit.
We do not recommend Toner Save for
printing Photo or Greyscale images.
Sleep Mode 1
The Sleep Mode Setting can reduce power
consumption. When the machine is in Sleep
Mode (Power Save mode) it acts as though it
were turned off. Receiving data or starting an
operation wakes up the machine from Sleep
mode to Ready mode.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data or
makes a copy, the timer will be reset. The
default setting is 3 minutes.
While the machine is in sleep mode the LCD
will show Sleep.
a Press Menu, 1, 4, 2.
b Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c Press Stop/Exit.
General Setup 1
To Next Page
Loading...
Need help?
General
